⟁ Florida Well Data field records · 2026 survey

Florida Well Data › Hillsborough County

Hillsborough County, Florida: well depth, water level & drilling cost

✓ 155,790 FL WMD/county records · verified 2026-06-30

56 ftmedian well depth
15 ft–168 fttypical depth range
13 ftmedian static water level
—median yield (— tests)

How deep are wells in Hillsborough County, Florida?

The median drilled well depth in Hillsborough County is 56 ft, based on 143,100 wells with recorded depths in the state FL WMD/county database. Half of all wells fall between 15 ft and 168 ft; 90% are shallower than 260 ft. Wells drilled since 2016 have a median depth of 30 ft.

How much does it cost to drill a well in Hillsborough County?

Applying published per-foot rates to the local median depth of 30 ft: drilling and casing alone typically runs $750–$1,950; a complete system including pump, pressure tank, and hookup typically runs $1,800–$3,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Hillsborough County?

The median static water level is 13 ft below ground surface (middle half of wells: 6 ft–27 ft), from 99,539 measurements.

How much water do wells in Hillsborough County produce?

Few pump tests are recorded for this county.

Pull every recorded well near a Hillsborough County address — $19

Drilled depth distribution

0–50 ft 69,559 50–100 ft 13,175 100–150 ft 17,625 150–200 ft 14,021 200–300 ft 19,210 300–400 ft 6,595 400–600 ft 1,649 600+ ft 1,266

Who drills wells in Hillsborough County?

Companies by number of wells permitted in this county since 2016, per public water-management-district and county well-permit records.

DrillerWells since 2016
PREFERRED DRILLING SOLUTION INC3,820
POPES WATER SYSTEMS INC.1,137
NATIONAL ENV TECHNOLOGY INC1,041
Ambient Technologies, Inc.955
BAKER WELL DRILLING INC.814
Accurate Drilling Solutions784
HUSS DRILLING INC781
Action Environmental739

Get quotes from local drillers

Looking at a specific property in Hillsborough County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from FL WMD/county records (public well records aggregated from Florida water-management districts + county programs (well-use codes vary by source, so all filed wells are included); depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.