⟁ Florida Well Data field records · 2026 survey

Florida Well Data › Baker County › Mary (32040)

Mary, FL (32040): well depth, water level & drilling cost

✓ 55 FL WMD/county records · Baker County

160 ftmedian well depth
125 ft–175 fttypical depth range
26 ftmedian static water level
—median yield (— tests)

How deep are wells in Mary (32040), Florida?

The median drilled well depth in Mary (32040) is 160 ft, based on 47 wells with recorded depths in the state FL WMD/county database. Half fall between 125 ft and 175 ft; 90% are shallower than 215 ft.

How much does it cost to drill a well in Mary (32040)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Mary (32040)?

The median static water level is 26 ft below ground surface (middle half of wells: 22 ft–31 ft), from 12 measurements.

Pull every recorded well near a Mary (32040) address — $19

Drilled depth distribution

0–50 ft 1 50–100 ft 3 100–150 ft 17 150–200 ft 18 200–300 ft 6 300–400 ft 1 400–600 ft 1 600+ ft 0
Looking at a specific property in Mary (32040)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Baker County well records.

Method: medians computed from FL WMD/county records (public well records aggregated from Florida water-management districts + county programs (well-use codes vary by source, so all filed wells are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.